FAQ

How Do I Restore Factory Settings Through Hardware?

Follow these steps:

  1. Press the RESET button while turning the TK600 on.

  2. As soon as the ERROR LED lights up (approx. 10 seconds after switching on), release the RESET button.

  3. After a few seconds, the ERROR LED will no longer light up. Now press the RESET button again until the Error light flashes and then release the button.

  4. Now the LED lights ERROR and STATUS are flashing, which means that the reset to the default setting was successful.

Default factory settings

IP WAN:

192.168.1.1

IP LAN:

192.168.2.1

Net mask:

255.255.255.0

Username:

adm

Password:

123456

Serial Port RS-485:

115200-N-8-1

Serial Port RS-232:

9600-N-8-1